Close

    Climate Control Accessories Control Regulation

    Internal temperature displays and thermostats, hygrostats, speed controls, and more for climate control.

    Control/Regulation

    We offer a wide range of control and regulation accessories for heating & cooling, climate control, and air conditioning systems and enclosures.

    Digital Enclosure Internal Temperature Display and Thermostat

    This digital enclosure temperature display and thermostat combination is designed for installation in the enclosure’s door or wall. The 3-digit, 7-segment display supports displaying temperatures in either °C or °F.

    Digital Enclosure Internal Temperature Display and Thermostat with I U Patch Panel

    This digital enclosure temperature display and thermostat combination is integrated into a 1 U patch panel and is designed for installation in the enclosure’s door or wall. The 3-digit, 7-segment display supports displaying temperatures in either °C or °F.

    Enclosure Internal Thermostat

    This thermostat is useful for controlling fan-and-filter units, heaters and heat exchangers; it can also be used as a signal generator for monitoring the enclosure internal temperature.

    Hygrostat

    This device simplifies keeping an enclosure’s relative humidity below the dew point and prevents condensation on assemblies or electronic components. The hygrostat switches on the heater and/or fan when a preset relative humidity in the enclosure is exceeded.

    Bottom-Mounted Adaptor for Enclosure Internal Thermostat and Hygrostat

    With mounting option for screwed cable glands, for targeted cable infeed from appropriate equipment such as SK fan-and-filter units and enclosure heaters. When used with screwed cable glands, it also provides strain relief.

    Speed Control

    Temperature-dependent speed control can help you reduce noise and save money on your enclosure climate control.

    EC Speed Control: Control Unit for EC Fan-and-Filter Units

    Supports activation and monitoring of up to 4 EC fan-and-filter units to reduce noise and save energy. Also supports monitoring function of the fan.

    EC Speed Control Sensor

    NTC sensor for temperature-dependent speed control of EC fan-and-filter units to reduce noise and save energy.

    Speed Control

    Temperature-dependent speed control for TopTherm fan-and-filter units and air/air heat exchangers for noise reduction and to save energy in part-load operation.

    Interface Board for Equipment with E-Comfort Controller

    The interface board supports controlling equipment with an e-Comfort controller, so it can be used in a variety of ways, such as monitoring a master/slave combination of up to 10 cooling units.

    Master/Slave Cable: For SK BUS System

    This 3 m shielded interface cable is compatible with the SK BUS system, which allows several cooling units and air/water heat exchangers with the e-Comfort controller to communicate with one another. Master-slave configuration for complex bayed enclosure systems, for optimum operating results.

    Master/Slave Adaptor: For Thermoelectric Cooler

    This master-slave adaptor for the Rittal thermoelectric cooler allows up to 5 thermoelectric coolers in complex bayed enclosure systems to communicate with one another, making it easier to ensure better climate control results.

    Toroidal Transformer: Primary Connection 115 V/400 V

    Designed for use with the power supply of a wall-mounted air/water heat exchanger.

     

    Learn More

    CHOOSE YOUR AREA OF INTEREST: INDUSTRIAL SOLUTIONS OR DATA CENTER SOLUTIONS