Close

Fans and Filters

Top Therm Fan




Request a Quote




TopTherm Filter Fans

Everything about TopTherm is designed to be simple:

  • Quick-fit technology enables TopTherm filter fans to snap into prepared mounting cutouts to eliminate the need for any tools.
  • Reversing the fan motors changes the airflow direction.
  • Power connections can be positioned for quick wiring with spring clamp terminals that require no tools.
  • Louvered grill latch for quick, toolless filter mat replacement.

Capacities range from 12-242 CFM with full range of voltages; diagonal fan motor design provides greater pressure stability for more constant airflow.

Learn More
Filter Fans
Roof-Mounted Fans
Rack-Mounted Fans & Blower Fans
Mini-Fans
Filter Systems
Accessories
  • Top Therm Complete Fan Unit

    TopTherm

    Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 – 900 m³/h, protection category IP 54 as standard.

    Complete fan unit with EMC shielding

    Therm EMC

    Complete fan unit with EMC shielding for tool-free mounting on surfaces. Air throughput from 20 – 900 m³/h, protection category IP 54 as standard.

    Energy efficient Therm EC fan

    Therm EC

    Energy-efficient version of the RTT filter fan unit with EC technology. From 180 m³/h with integrated control interface (0-10 V/PWM input and tacho signal output) for controlling and monitoring the fan.

  • Top Therm roof-mounted fan

    TopTherm Roof-Mounted Fans

    The roof-mounted fans for TS precisely match the cut-outs on the TopTherm roof-mounted cooling units. Can also be mounted on any roof surface of sufficient size.

    Roof Vent

    Roof-Mounted Fan, Roof Vent

    Can be installed on any sufficiently large roof surface, air throughput 360 m3/h.

  • Rack-mounted fans

    Rack-Mounted Fans for 482.6 mm

    Rack-mounted fan with integral speed control and fault evaluation. Mounted directly on the 19″ level.

    Variable speed rack-mounted fans

    Vario Rack-Mounted Fans for 482.6 mm

    Rack-mounted fan with integral speed control and fault evaluation. Mounted directly on the 19″ level. Guide frame makes for easy fan maintenance.

    Tangential Fans

    Tangential Fans for 482.6 mm

    2U blower fan with up to 320 m3/h air throughput. Minimal noise generation of 52 dB, making the fan suitable for use in office environments.

  • Mini DC fan for enclosures

    Mini-Fan

    Compact DC fan for enclosure and component cooling in enclosures.

    Internal enclosure fan for TS 8

    Enclosure Internal Fan for TS 8

    To prevent hot spots inside enclosures and facilitate the ventilation of active enclosure climate control components.

  • Tangential fan filter mats

    Filter Mats for Tangential Fans

    Filter mats for tangential fans.

    Cooling unit and heat exchanger filter mats

    Filter Mats

    For cooling units and air/air heat exchangers.

    Metal Filters for climate control

    Metal Filters

    For cooling units, climate control door/section doors, air/air heat exchangers and chillers.

    Spare filter mats

    Spare Filter Mats

    Always keep spare filters on hand to ensure continuous cooling system protection.

    10 micron filter mats

    Fine Filter Mats

    These chopped-fiber mats have a progressive structure that provides reliable filtering of virtually all types of dust with particle sizes of 10 μm or greater.

    Outlet filters

    Outlet Filters (Standard and EMC)

    These outlet filters, constructed of ABS, can be installed in the upper and lower sections of the enclosure for ventilation by convection.

    Filter holders

    Filter Holders

    A filter mat is required to increase the protection category of the 3148.007 roof vent to IP 44.

  • Controls and Displays for climate control

    Control/Regulation

    Internal temperature displays and thermostats, hygrostats, speed controls, interface boards, master/slave adaptors and cables, mounting adapters and more for climate control.

    Filter Hoods

    Hose-Proof Hoods

    For fan-and-filter units/outlet filters. Easy cleaning thanks to exterior silicone coating approved for use with foodstuffs.

    Blanking Cover for Filters

    Blanking Covers

    If existing mounting cut-outs for filter fan units/outlet filters need to be closed to achieve a higher protection category, the filter mat of the filter fan unit/outlet filter can simply be replaced with a blanking cover; welding or other mechanical modification of the enclosure is not necessary.

    Louvres for ventilation

    Integrated Louvres

    For ventilation by convection; easily retro-fitted using 4 screws.

*Terms and conditions subject to change; available at participating dealers.